Datenblatt-pdf.com


CG2409M2 Schematic ( PDF Datasheet ) - CEL

Teilenummer CG2409M2
Beschreibung High Power SPDT RF Switch
Hersteller CEL
Logo CEL Logo 




Gesamt 7 Seiten
CG2409M2 Datasheet, Funktion
PRELIMINARY DATASHEET
RF SWITCH
CG2409M2
EHnitgerhaPSohowrteDroScPumDeTntR/TFitleSNwaimtcehHere
DESCRIPTION
The CG2409M2 is a GaAs MMIC high power SPDT
(Single Pole Double Throw) switch which was
designed for WiMAX and Wireless LAN applications
FEATURES
Control voltage:
VC(H) = 1.8 to 5.0 V (3.0V TYP.)
VC(L) = -0.2 to 0.2 V (0V TYP.)
Low insersion loss:
Lins1 = 0.35 dB TYP. @ f = 1.0 GHz
Lins2 = 0.45 dB TYP. @ f = 2.5 GHz
Lins3 = 0.50 dB TYP. @ f = 3.0 GHz
High isolation:
ISL1 = 30 dB TYP. @ f = 1.0 GHz
ISL2 = 27 dB TYP. @ f = 2.5 GHz
ISL3 = 23 dB TYP. @ f = 3.0 GHz
Power Handling
Pin(0.1dB) = +37.5 dBm TYP. @ f = 2.5 GHz,
VC(H) = 3.0 V, VC(L) = 0 V
PACKAGE
6-pin mini mold Package
(2.0mm x 1.25mm x 0.9mm)
APPLICATIONS
WiMAX and wireless LAN
(IEEE802.11a/b/g/n/ac)
ORDERING INFORMATION
Part Number
Order Number
CG2409M2
CG2409M2-C4
CG2409M2-EVAL CG2409M2-EVAL
Package
6-pin mini mold
(Pb-Free)
Marking
C0L
Description
Embossed Tape 8 mm wide
Pin 4, 5, 6 face the perforation
side of the tape
MOQ 10 kpcs/reel
Evaluation Board with DC block
capacitors, power supply
bypass capacitors, and RF and
DC connectors
MOQ 1
This document is subject to change without notice.
Date Published: September 2016
CDS-0032-01 (Issue A)
1






CG2409M2 Datasheet, Funktion
PRELIMINARY DATASHEET
CG2409M2
[CAUTION]
All information included in this document is current as of the date this document is issued. Such information,
however, is subject to change without any prior notice.
You should not alter, modify, copy, or otherwise misappropriate any CEL product, whether in whole or in part.
CEL does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of
third parties by or arising from the use of CEL products or technical information described in this document. No
license, expressed, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual
property rights of CEL or others.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the
operation of semiconductor products and application examples. You are fully responsible for the incorporation of
these circuits, software, and information in the design of your equipment. CEL assumes no responsibility for any
losses incurred by you or third parties arising from the use of these circuits, software, or information.
CEL has used reasonable care in preparing the information included in this document, but CEL does not warrant
that such information is error free. CEL assumes no liability whatsoever for any damages incurred by you resulting
from errors in or omissions from the information included herein.
Although CEL endeavors to improve the quality and reliability of its products, semiconductor products have specific
characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions.
Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or
damage caused by fire in the event of the failure of a CEL product, such as safety design for hardware and software
including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging
degradation or any other appropriate measures
Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final
products or system manufactured by you.
Please use CEL products in compliance with all applicable laws and regulations that regulate the inclusion or use of
controlled substances, including without limitation, the EU RoHS Directive.
CEL assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and
regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent
of CEL.
Please contact CEL if you have any questions regarding the information contained in this document or CEL
products, or if you have any other inquiries.
This document is subject to change without notice.
6

6 Page







SeitenGesamt 7 Seiten
PDF Download[ CG2409M2 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
CG2409M2High Power SPDT RF SwitchCEL
CEL

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche