|
|
Número de pieza | ESDA-1K | |
Descripción | EOS and ESD Transil protection | |
Fabricantes | STMicroelectronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ESDA-1K (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! ESDA-1K
EOS and ESD Transil™ protection for charger and battery port
Features
■ Breakdown voltage: 12 V, 18 V
■ Unidirectional device
■ High peak power dissipation: 450 W (8/20 µs
waveform)
■ ESD protection level better than
IEC 61000-4-2 level 4: 30 kV contact
discharge.
■ Low leakage current < 0.5 µA at 5 V
■ PCB area: 1.3 mm2
Benefits
■ High EOS and ESD protection level
■ High integration
■ Suitable for high density board
■ Small package
Complies with the following standards
■ IEC 61000-4-2 level 4
– 15 kV (air discharge)
– 8 kV (contact discharge)
■ MIL STD 883G - Method 3015-7 Class 3B
– HBM (Human Body Model): ≥ 8 kV
Applications
Where transient overvoltage protection in ESD
sensitive equipment is required, such as:
■ Computers
■ Printers
■ Communication systems
■ Cellular phone handsets and accessories
■ Video equipment
SOD-523
Figure 1. Functional diagram
Pin 1
Pin 2
Description
The ESDA-1K is a single line Transil diode
designed specifically for the protection of
integrated circuits in portable equipment and
miniaturized electronics devices subject to ESD
and EOS transient overvoltages.
September 2010
TM: Transil is a trademark of STMicroelectronics.
Doc ID 17883 Rev 1
1/10
www.st.com
10
1 page ESDA-1K
3 Package information
Package information
● Epoxy meets UL94,V0
● Lead-free package
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Table 4. SOD-523 dimensions
E 0.15 M C A B
E1
B
2xb D
A
SEATING PLANE
C
0.20 M C A B
A
R0.1
c
L
8°
7°
L1
Dimensions
Ref. Millimeters
Inches
Min. Typ. Max. Min. Typ. Max.
A 0.50 0.60 0.70 0.020 0.024 0.028
E 1.50 1.60 1.70 0.059 0.063 0.067
E1 1.10 1.20 1.30 0.043 0.047 0.051
D 0.70 0.80 0.90 0.028 0.031 0.035
b 0.25
0.35 0.010
0.014
c 0.07
0.20 0.003
0.008
L 0.15 0.20 0.25 0.006 0.008 0.010
L1 0.05
0.20 0.002
0.008
Figure 10. Footprint (dimensions in mm)
Figure 11. Marking
0.7
0.3
2
1X
Pin 1
Pin 2
Note:
Product marking may be rotated by multiples of 90° for assembly plant differentiation. In no
case should this product marking be used to orient the component for its placement on a
PCB. Only pin 1 mark is to be used for this purpose.
Doc ID 17883 Rev 1
5/10
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet ESDA-1K.PDF ] |
Número de pieza | Descripción | Fabricantes |
ESDA-1K | EOS and ESD Transil protection | STMicroelectronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |