Datenblatt-pdf.com


BD11600NUX Schematic ( PDF Datasheet ) - ROHM Semiconductor

Teilenummer BD11600NUX
Beschreibung USB Switch IC
Hersteller ROHM Semiconductor
Logo ROHM Semiconductor Logo 




Gesamt 13 Seiten
BD11600NUX Datasheet, Funktion
USB Switch ICs
DPDT Type
(Double Pole Double Throw)
BD11600NUX
No.11103EAT03
Description
BD11600NUX is DPDT analog switches handling with USB2.0 high-speed that have both a low resistance and a low
capacitance. Moreover, this is widely guaranteed from 2.5V to 5.5V as for the range of the power-supply voltage.
This has a low consumption mode by making OE “H” and the multi-selector by making the combination of OE “L” and S.
The electrostatic discharge protection circuit is built-in in all terminals.
Features
1) VCC Operation from 2.5V to 5.5V.
2) 3Ω switches between the input to the output.
3) Low Capacity 2ch Analog SW.
4) 10-Pin SON Package. (3.0mm x 2.0mm, Height=0.6mm, 0.5mm pitch)
Applications
Digital Still Cameras, Digital Video Camcorders, Portable Navigation Devices, TV, Portable DVD Players,
Portable Game Systems, Personal computers, PDA, Mobile phones
Line up matrix
Parameter
BD11600NUX
BD11601NUX
Supply Quiescent Current
Input voltage range
Switch ON Resistance ( VIN=0 V )
Switch ON Capacitance
Configuration
Package
3Ω
DPDT
VSON010X3020
18 µA
2.55.5 V
6 pF
2.5 Ω
DPST
VSON008X2020
Absolute maximum ratings (Ta=25)
Parameter
Symbol
Ratings
Unit Conditions
Input supply voltage
Vmax
-0.57.0
V D+,D-,1D+,1D-,2D+,2D- Pins
Input supply voltage
Vmax
-0.37.0
V Other Pins
Power dissipation
Pd
1.925
W *1
Operating temperature range
Topr
-40+85
Storage temperature range
Tstr
-55+150
*1 When using more than at Ta=25, it is reduced 15.4 mW per 1. ROHM specification board 70mm×70mm mounting.
Operating conditions (Ta=-40+85)
Parameter
Symbol
Ratings
Unit Conditions
Input voltage range (VCC)
VCC
2.55.5
* This product does not especially designed to be protected from radioactivity.
V
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
1/10
2011.08 - Rev.A






BD11600NUX Datasheet, Funktion
BD11600NUX
How to select parts of application
High Speed
USB
TRANSCEIVER
High Speed
USB
TRANSCEIVER
VCC
1D+
1D-
2D+
2D-
Technical Note
SW1
SW2
D+
USB
D- Connector
Control
OE
S
GND
Fig.10
Application circuit of multi-USB TRANSCEIVER
High Speed
USB
TRANSCEIVER
D+
D-
SW1
SW2
OE
S
GND
Control
VCC
1D+
1D-
2D+
2D-
USB
HOST1
USB
HOST2
Fig.11
Application circuit of two communicating with two USB HOST
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
6/10
2011.08 - Rev.A

6 Page









BD11600NUX pdf, datenblatt
Datasheet
Precautions Regarding Application Examples and External Circuits
1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2. You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise your own independent verification and judgment in the use of such information
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper
caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be
applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).
Precaution for Storage / Transportation
1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommended by ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period
may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is
exceeding the recommended storage time period.
3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads
may occur due to excessive stress applied when dropping of a carton.
4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of
which storage time is exceeding the recommended storage time period.
Precaution for Product Label
QR code printed on ROHM Products label is for ROHM’s internal use only.
Precaution for Disposition
When disposing Products please dispose them properly using an authorized industry waste company.
Precaution for Foreign Exchange and Foreign Trade act
Since our Products might fall under controlled goods prescribed by the applicable foreign exchange and foreign trade act,
please consult with ROHM representative in case of export.
Precaution Regarding Intellectual Property Rights
1. All information and data including but not limited to application example contained in this document is for reference
only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any
other rights of any third party regarding such information or data. ROHM shall not be in any way responsible or liable
for infringement of any intellectual property rights or other damages arising from use of such information or data.:
2. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the information contained in this document.
Other Precaution
1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including but not limited to, the development of mass-destruction
weapons.
4. The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
Notice - GE
© 2014 ROHM Co., Ltd. All rights reserved.
Rev.002

12 Page





SeitenGesamt 13 Seiten
PDF Download[ BD11600NUX Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
BD11600NUXUSB Switch ICROHM Semiconductor
ROHM Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche