|
|
PDF AH101 Data sheet ( Hoja de datos )
| Número de pieza | AH101 | |
| Descripción | High Linearity Amplifier | |
| Fabricantes | WJ Communication | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AH101 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
AH101
Medium Power, High Linearity Amplifier
The Communications Edge TM
Product Information
Product Features
x 50 – 1500 MHz
x +47 dBm Output IP3
x 13.5 dB Gain
x +26.5 dBm P1dB
x MTTF > 1000 Years
x Internally Matched
x Single +9 V Supply
x Lead-free/Green/RoHS-
compliant SOT-89 Package
Applications
x Mobile Infrastructure
x CATV / DBS
x Defense / Homeland Security
Product Description
The AH101 is a medium power gain block that offers
excellent dynamic range in a low-cost surface mount
package. The combination of a single supply voltage and
an internally matched device makes it ideal for both narrow
and broadband applications. Only dc blocking and bypass
capacitors as well as an RF choke are required for operation.
Superior thermal design allows the product to achieve +46
dBm IP3 performance at a mounting temperature of +85 qC
with an associated MTTF of greater than 1000 years. The
AH101 is available in the environmentally-friendly lead-
free/green/RoHS-compliant SOT-89 package. The
broadband amplifier uses a high reliability GaAs MESFET
technology and is targeted for applications where high
linearity is required.
Functional Diagram
GND
4
1
RF IN
2
GND
Function
Input
Ground
Output / Bias
Ground
3
RF OUT
Pin No.
1
2
3
4
Specifications (1)
Parameter
Operational Bandwidth
Test Frequency
Gain
Input Return Loss
Output Return Loss
Output IP3 (2)
Output P1dB
Noise Figure
Operating Current Range
Supply Voltage
Units
MHz
MHz
dB
dB
dB
dBm
dBm
dB
mA
V
Min
50
12
+43
170
Typ
800
13.5
20
15
+47
+26.5
3.5
200
+9
Max
1500
230
1. Test conditions unless otherwise noted: T = 25 ºC, Vdd = +9 V in a 50 ohm test fixture.
2. OIP3 is measured with two tones at an output power of +8 dBm/tone separated by 10 MHz. The
suppression on the largest IM3 product is used to calculate the OIP3 using a 2:1 rule.
Typical Performance
Parameter
Frequency
Gain
S11
S22
Output P1dB
Output IP3 (2)
Output IP2
Noise Figure
Supply Current
Supply Voltage
Units
MHz
dB
dB
dB
dBm
dBm
dBm
dB
mA
V
50
13.6
-23
-8
+26.1
+45
+63
4.4
Typical
450 900
13.8 13.5
-27 -21
-14 -18
+26.5 +26.5
+47 +47
+63 +60
3.4 3.6
200
+9
1500
12.7
-14
-16
+25
+47
+59
4.2
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
DC Voltage
RF Input Power (continuous)
Junction Temperature
Rating
-40 to +85 qC
-55 to +150 qC
+11 V
+18 dBm
220 qC
Ordering Information
Part No.
AH101-G
AH101-PCB
Description
Med. Power High Linearity Amplifier
(lead-free/green/RoHS-compliant SOT-89 Pkg)
50-1500 MHz Fully Assembled Evaluation Board
Operation of this device above any of these parameters may cause permanent damage.
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: [email protected] Web site: www.wj.com
Page 1 of 5 June 2006
1 page  
AH101
Medium Power, High Linearity Amplifier
The Communications Edge TM
Product Information
AH101-G (Green / Lead-free SOT-89 Package) Mechanical Information
This package is lead-free/Green/RoHS-compliant. It is compatible with both lead-free (maximum 260 qC reflow temperature) and leaded
(maximum 245 qC reflow temperature) soldering processes. The plating material on the leads is NiPdAu.
Outline Drawing
Product Marking
The AH101-G will be marked with an
“101G” designator. An alphanumeric lot
code (“XXXX-X” ) is also marked below the
part designator on the top surface of the
package. The obsolete tin-lead package is
marked with an “AH101” designator
followed by an alphanumeric lot code.
Tape and reel specifications for this part are
located on the website in the “Application
Notes” section.
Land Pattern
MSL / ESD Rating
ESD Rating: Class 1C
Value:
Passes 1000V min.
Test: Human Body Model (HBM)
Standard: JEDEC Standard JESD22-A114
ESD Rating: Class IV
Value:
Passes 1000V min.
Test: Charged Device Model (CDM)
Standard: JEDEC Standard JESD22-C101
MSL Rating: Level 3 at +260 C convection reflow
©
Standard: JEDEC Standard J-STD-020
Thermal Specifications
Parameter
Rating
Operating Case Temperature
Thermal Resistance, Rth (1)
Junction Temperature, Tj (2)
-40 to +85 qC
25 qC / W
130 qC
1. The thermal resistance is referenced from the hottest
part of the junction to the ground tab (pin 4).
2. This corresponds to the typical biasing condition of
+9V, 200 mA at an 85 C case temperature. A
©
minimum MTTF of 1 million hours is achieved for
junction temperatures below 160 C.
©
MTTFvs. GNDTabTemperature
1000
100
10
Mounting Config. Notes
1. Ground / thermal vias are critical for the proper
performance of this device. Vias should use a .35mm
(#80 / .0135” ) diameter drill and have a final plated
thru diameter of .25 mm (.010” ).
2. Add as much copper as possible to inner and outer
layers near the part to ensure optimal thermal
performance.
3. Mounting screws can be added near the part to fasten
the board to a heatsink. Ensure that the ground /
thermal via region contacts the heatsink.
4. Do not put solder mask on the backside of the PC board
in the region where the board contacts the heatsink.
5. RF trace width depends upon the PC board material
and construction.
6. Use 1 oz. Copper minimum.
7. All dimensions are in millimeters (inches). Angles are
in degrees.
1
60 70 80 90 100 110 120
Tab Temperature (°C)
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: [email protected] Web site: www.wj.com
¨
¨¨
¨
Page 5 of 5 June 2006
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet AH101.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AH100 | Misch Hexode |  TELEFUNKEN |
| AH101 | High Linearity Amplifier | WJ Communication |
| AH101-G | High Linearity Amplifier |  TriQuint Semiconductor |
| AH102 | High Linearity Amplifier | WJ Communication |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |