Datenblatt-pdf.com


LM311 Schematic ( PDF Datasheet ) - National Semiconductor

Teilenummer LM311
Beschreibung Voltage Comparator
Hersteller National Semiconductor
Logo National Semiconductor Logo 




Gesamt 21 Seiten
LM311 Datasheet, Funktion
May 1999
LM111/LM211/LM311
Voltage Comparator
1.0 General Description
The LM111, LM211 and LM311 are voltage comparators that
have input currents nearly a thousand times lower than de-
vices like the LM106 or LM710. They are also designed to
operate over a wider range of supply voltages: from standard
±15V op amp supplies down to the single 5V supply used for
IC logic. Their output is compatible with RTL, DTL and TTL
as well as MOS circuits. Further, they can drive lamps or re-
lays, switching voltages up to 50V at currents as high as 50
mA.
Both the inputs and the outputs of the LM111, LM211 or the
LM311 can be isolated from system ground, and the output
can drive loads referred to ground, the positive supply or the
negative supply. Offset balancing and strobe capability are
provided and outputs can be wire OR’ed. Although slower
than the LM106 and LM710 (200 ns response time vs 40 ns)
the devices are also much less prone to spurious oscilla-
tions. The LM111 has the same pin configuration as the
LM106 and LM710.
The LM211 is identical to the LM111, except that its perfor-
mance is specified over a −25˚C to +85˚C temperature range
instead of −55˚C to +125˚C. The LM311 has a temperature
range of 0˚C to +70˚C.
2.0 Features
n Operates from single 5V supply
n Input current: 150 nA max. over temperature
n Offset current: 20 nA max. over temperature
n Differential input voltage range: ±30V
n Power consumption: 135 mW at ±15V
3.0 Typical Applications (Note 3)
Offset Balancing
Strobing
DS005704-36
Increasing Input Stage Current (Note 1)
DS005704-37
Note: Do Not Ground Strobe Pin. Output is turned off when current is
pulled from Strobe Pin.
Detector for Magnetic Transducer
DS005704-38
Note 1: Increases typical common mode slew from 7.0V/µs to 18V/µs.
DS005704-39
© 1999 National Semiconductor Corporation DS005704
www.national.com






LM311 Datasheet, Funktion
6.0 LM111/LM211 Typical Performance Characteristics (Continued)
Response Time for Various
Input Overdrives
Response Time for Various
Input Overdrives
Output Limiting Characteristics
Supply Current
DS005704-52
Supply Current
DS005704-53
Leakage Currents
DS005704-54
DS005704-55
DS005704-56
7.0 LM311 Typical Performance Characteristics
Input Bias Current
Input Offset Current
Offset Error
DS005704-57
DS005704-58
DS005704-59
DS005704-60
www.national.com
6

6 Page









LM311 pdf, datenblatt
9.0 Typical Applications (Pin numbers refer to H08 package) (Continued)
Crystal Oscillator
Comparator and Solenoid Driver
DS005704-19
Precision Squarer
DS005704-20
*Solid tantalum
Adjust to set clamp level
DS005704-21
www.national.com
12

12 Page





SeitenGesamt 21 Seiten
PDF Download[ LM311 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
LM310Voltage FollowerNational Semiconductor
National Semiconductor
LM3100LM3100 SIMPLE SWITCHER Synchronous 1MHz 1.5A Step-Down Voltage Regulator (Rev. G)Texas Instruments
Texas Instruments
LM3100Voltage RegulatorNational Semiconductor
National Semiconductor
LM3102LM3102/-Q1 SIMPLE SWITCHER Synchronous 1-MHz 2.5-A Step-Down Voltage Regulator (Rev. H)Texas Instruments
Texas Instruments
LM3102-Q1LM3102/-Q1 SIMPLE SWITCHER Synchronous 1-MHz 2.5-A Step-Down Voltage Regulator (Rev. H)Texas Instruments
Texas Instruments

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche