Datenblatt-pdf.com


SC9364A Schematic ( PDF Datasheet ) - Silan Microelectronics

Teilenummer SC9364A
Beschreibung 8051 MCU
Hersteller Silan Microelectronics
Logo Silan Microelectronics Logo 




Gesamt 28 Seiten
SC9364A Datasheet, Funktion
SC9364
8051 MCU WITH BUILT-IN PLL FOR RADIO AND AUDIO CONTROL SYSTEM
DESCRIPTION
SC9364 adopts 8051 structure, integrates 64K*8FLASH, 8K*8RAM,
LDO and RTC modules also provides the function modules of DTS, I2C,
UART, SPI, ADC, LCD, etc. which are applicable in desk-top audio and
car audio control.
FEATURES
* In system programming (ISP)
* 2.7-3.6V power supply, integrate LDO module to power the chip
core; external LDO can also be useful.
* Multi low power dissipation mode
* 8051 structure, compatible with standard MCS_51 instructions.
2~4 clock instruction cycle
Dual data pointer
* Built-in 64Kx8 FLASH can be used as program memory or data
memory; The flash can be programmed by on-chip program or
the programmer.
* Data memory
IDATA: 256Byte (compatible with 8051)+64Byte (store data while
power down, indirect addressing is available)
XDATA: 8Kbyte external data memory, where 4K can be used as
program memory for supporting FLASH programming.
* Integrate RTC module, provide alarm clock and auto switch
function among calendar, clock and leap year, with clock
adjusting function.
* 69 GPIO (SC9364C) in maximum
* Provide 32*4 LCD driver outputs.
* 4 8bit timer: T0/T1/T2/T3. T0/T1 are the same with that of 8051,
T2 supports PWM/CAPTURE function.
* Extended interrupt module, 8-channel external interrupts, 8-
channel internal interrupts.
* 2 UART interfaces.
* 1 SPI interface.
* Integrate 8-channel 8Bits A/D.
* 1 I2C interface.
* Integrate DTS module with internal PLL.
APPLICATIONS
* Desk-top audio, car audio
HANGZHOU MICROELECTRONICS CO.,LTD
Http: //www.silan.com.cn
REV:1.0 2009.04.22
Page 1 of 28
This datasheet has been downloaded from http://www.digchip.com at this page






SC9364A Datasheet, Funktion
PIN CONFIGURATION (CONTINUED)
SC9364
100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81
P1.7 1
P2.0 2
P2.2 3
P2.3 4
VSSA 5
VDDA 6
AN0 7
AN1 8
AN2 9
AN3 10
AN4 11
AN5 12
VSS 13
VDD 14
XT1 15
XT2 16
notTestEn 17
notExtRst 18
P2.4 19
P4.0 20
P4.1 21
P4.2 22
P4.3 23
P4.4 24
P4.5 25
P4.6 26
VDD2o5 27
VDD2o5OUT 28
VDDA 29
VSSA 30
SC9364B
80 FMIN
79 VDDA
78 P9.7
77 P9.6
76 P9.5
75 P9.4
74 P9.3
73 P9.2
72 P9.1
71 notDebugEn
70 P10.1
69 P10.0
68 VLC0
67 VLC1
66 VLC2
65 VSS
64 VDD2o5
63 P8.3
62 P8.2
61 P8.1
60 P8.0
59 P7.7
58 P7.6
57 P7.5
56 P7.4
55 P7.3
54 P7.2
53 P7.1
52 P7.0
51 P6.7
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
HANGZHOU MICROELECTRONICS CO.,LTD
Http: //www.silan.com.cn
REV:1.0 2009.04.22
Page 6 of 28

6 Page









SC9364A pdf, datenblatt
SC9364
Pin No.
14
15
16
17
18
19
20
21
22~28
29~34
35
36
37
38
39~44
45
46~53
54~56
57
58
59
60
61
62
63
64
65
66~69
70
71
72
73
74
75
76
Pin Name
XT1
XT2
notTestEn
notExtRst
P2.4
P2.5
P2.6
P2.7
P4.0~P4.6
NC
VDD2o5
VDD2o5OUT
VDDA
VSSA
NC
P4.7
P5.0~P5.7
P6.0~P6.2
P6.3
P6.4
P6.5
P6.6
VPP
VDD
Xin
Xout
VSS
NC
P6.7
P7.0
P7.1
P7.2
P7.3
P7.4
P7.5
77 P7.6
I/O Pin Function
I 75KHz oscillator input pin.
O 75KHz oscillator output pin.
Test mode control pin, with pull-up resistor;
I
notTestEn=0, test mode.
I Reset pin, with pull-up resistor; When notExtRst=0, the circuit is reset.
I/O Can also be used as external interrupt input Int0.
I/O Can also be used as external interrupt input Int1.
I/O Can also be used as the pulse input of T2 and external interrupt Int4.
I/O Can also be used as the pulse input of T3 and external interrupt Int5.
I/O Can also be used as LCD driver SEG0~SEG6.
-- NC
-- 2.5V power supply input pin.
2.5v output pin of LDO, connects capacitor filter and input from VDD2o5
--
pin, provide 2.5V power supply to the chip.
-- Power supply of LDO and LCD analog module.
-- Ground of LDO module.
-- NC
I/O Can also be used as LCD driver SEG7.
I/O Can also be used as LCD driver SEG8~SEG15.
I/O Can also be used as LCD driver SEG16~SEG18.
I/O Can also be used as LCD driver SEG19.
I/O Can also be used as LCD driver SEG20.
I/O Can also be used as LCD driver SEG21.
I/O Can also be used as LCD driver SEG22.
I FLASH high voltage pin used for testing.
-- Power supply of IO, RTC and 64*8RAM.
I 12MHz oscillator input pin.
O 12MHz oscillator output pin.
-- Ground.
-- NC
I/O Can also be used as LCD driver SEG23.
I/O Can also be used as LCD driver SEG24.
I/O Can also be used as LCD driver SEG25.
I/O Can also be used as LCD driver SEG26.
I/O Can also be used as LCD driver SEG27.
I/O Can also be used as LCD driver SEG28.
Can also be used as LCD driver SEG29;
I/O
In debug mode, it is used as input pin of serial communication.
Can also be used as LCD driver SEG30. In debug mode, it is used as
I/O
output pin of serial communication.
HANGZHOU MICROELECTRONICS CO.,LTD
Http: //www.silan.com.cn
REV:1.0 2009.04.22
Page 12 of 28

12 Page





SeitenGesamt 28 Seiten
PDF Download[ SC9364A Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
SC93648051 MCUSilan Microelectronics
Silan Microelectronics
SC9364A8051 MCUSilan Microelectronics
Silan Microelectronics
SC9364B8051 MCUSilan Microelectronics
Silan Microelectronics
SC9364C8051 MCUSilan Microelectronics
Silan Microelectronics

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche