|
|
PDF 2SJ210 Data sheet ( Hoja de datos )
| Número de pieza | 2SJ210 | |
| Descripción | P-CHANNEL MOSFET FOR SWITCHING | |
| Fabricantes | Renesas | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 2SJ210 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
DATA SHEET
MOS FIELD EFFECT TRANSISTOR
2SJ210
P-CHANNEL MOSFET
FOR SWITCHING
The 2SJ210, P-channel vertical type MOSFET, is a switching
device which can be driven directly by the output of ICs having a
5 V power source.
The 2SJ210 has excellent switching characteristics and is
suitable as a high-speed switching device in digital circuits.
FEATURES
• Directly driven by the output of ICs having a 5 V power source.
• Not necessary to consider driving current because of its high
input impedance.
• Possible to reduce the number of parts by omitting the bias
resistor.
PACKAGE DRAWING (Unit: mm)
2.8 ±0.2
1.5
0.65
+0.1
–0.15
2
3
1
Marking
<R>
ORDERING INFORMATION
PART NUMBER
2SJ210
Marking: H16
PACKAGE
SC-59 (Mini Mold)
1. Source
2. Gate
3. Drain
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Drain to Source Voltage (VGS = 0 V)
VDSS
−60
Gate to Source Voltage (VDS = 0 V)
Drain Current (DC)
Drain Current (pulse) Note
Total Power Dissipation
VGSS
ID(DC)
ID(pulse)
PT
m20
m200
m400
200
Channel Temperature
Tch 150
Storage Temperature
Tstg −55 to +150
V
V
mA
mA
mW
°C
°C
Note PW ≤ 10 ms, Duty Cycle ≤ 50%
EQUIVALENT CIRCUIT
Drain
Gate
Body
Diode
Gate
Protection
Diode
Source
<R> Remark The diode connected between the gate and source of the transistor serves as a protector against ESD.
When this device actually used, an additional protection circuit is externally required if a voltage exceeding
the rated voltage may be applied to this device.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. D17906EJ3V0DS00 (3rd edition)
(Previous No. TC-2293A)
Date Published February 2006 NS CP(K)
Printed in Japan
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
1990
1 page  
2SJ210
• The information in this document is current as of February, 2006. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
• NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
• Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet 2SJ210.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 2SJ210 | P-CHANNEL MOS FET FOR SWITCHING |  NEC |
| 2SJ210 | MOS Fied Effect Transistor |  Kexin |
| 2SJ210 | P-CHANNEL MOSFET FOR SWITCHING | Renesas |
| 2SJ210C | P-CHANNEL MOSFET FOR SWITCHING | Renesas |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |