|
|
Número de pieza | SLC1175-700ME | |
Descripción | Shielded Power Inductors | |
Fabricantes | Coilcraft | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SLC1175-700ME (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Document 838-1
Shielded Power Inductors – SLC1175
• Ideal for use in multi-phase VRM/VRD regulators and high
current/high frequency DC/DC converters.
• Offers inductance values unavailable in other high current series.
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environment RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over copper.
Other terminations available at additional cost.
Weight 2.19 – 2.30 g
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 150/7″ reel, 700/13″ reel; Plastic tape: 24 mm wide,
0.4 mm thick, 12 mm pocket spacing, 7.62 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Inductance2
Part number1 ±20% (nH)
DCR (mOhms)3 SRF typ4 Isat (A)5
Irms (A)6
min max
(MHz) 10% drop 20% drop 30% drop 20°C rise 40°C rise
SLC1175-700ME_ 70
0.228 0.252 179 83 100 >100
25.5 35.5
SLC1175-121ME_ 120 0.228 0.252 144 80 84 88 25.5 35.5
SLC1175-151ME_ 150 0.228 0.252 95 64 70 76 25.5 35.5
SLC1175-171ME_ 170 0.228 0.252 73 54 60 63 25.5 35.5
SLC1175-201ME_ 200 0.228 0.252 64 48 53 55 25.5 35.5
SLC1175-231ME_ 230 0.228 0.252 61 41 46 49 25.5 35.5
SLC1175-271ME_ 270 0.228 0.252 52 32 37 40 25.5 35.5
SLC1175-301ME_ 300 0.228 0.252 48 27 31 34 25.5 35.5
1. When ordering, please specify packaging code:
SLC1175-301MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (150 per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (700 per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4284.
3. DCR is measured between the two points indicated below.
4. SRF measured using an Agilent/HP 8753ES network analyzer or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its
value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Points used for measuring DCR
Document 838-1 Revised 09/15/15
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet SLC1175-700ME.PDF ] |
Número de pieza | Descripción | Fabricantes |
SLC1175-700ME | Shielded Power Inductors | Coilcraft |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |