Datenblatt-pdf.com


W83637HG Schematic ( PDF Datasheet ) - Winbond

Teilenummer W83637HG
Beschreibung LPC I/O
Hersteller Winbond
Logo Winbond Logo 




Gesamt 30 Seiten
W83637HG Datasheet, Funktion
Winbond
LPC I/O
W83637HF
W83637HG
Revision: 1.6 Date: 2006/03/22






W83637HG Datasheet, Funktion
W83637HF/HG
1. GENERAL DESCRIPTION
W83637HF/HG is the new generation of Winbond's LPC I/O products. It is an evolving product from
Winbond’s most popular LPC I/O chip W83627HF/HG – which integrates the disk driver adapter, serial
port (UART), keyboard controller (KBC), SIR, CIR, game port, MIDI port, hardware monitor, ACPI, On
Now Wake-Up – plus additional new features: the Smart Card reader interface and Memory Stick TM
reader interface.
The Smart Card application is gaining more and more attention; it provides a very high-grade security
and convenience in Internet transaction, banking, telephony, electronic payments, etc. W83637HF/HG
supports a smart card reader interface featuring Smart wake-up function. This smart card reader
interface fully meets the ISO7816 and PC/SC (Personal Computer/Smart Card Workgroup) standards.
W83637HF/HG provides a minimum external components and lowest cost solution for smart card
applications.
W83637HF/HG implements a standard Memory StickTM reader interface. The Memory StickTM has
been a new mainstream media for storing and transferring data. It’s ultra-small size and high storage
capacity make it can be used in very wide variety products, including the Audio, Video and PC.
The disk drive adapter functions of W83637HF/HG include a floppy disk drive controller compatible
with the industry standard 82077/765, data separator, write pre-compensation circuit, decode logic,
data rate selection, clock generator, drive interface control logic, and interrupt and DMA logic. The wide
range of functions integrated onto the W83637HF/HG greatly reduces the number of components
required for interfacing with floppy disk drives. W83637HF/HG supports four 360K, 720K, 1.2M, 1.44M,
or 2.88M disk drives and data transfer rates of 250 Kb/s, 300 Kb/s, 500 Kb/s, 1 Mb/s, and 2 Mb/s.
W83637HF/HG provides two high-speed serial communication ports (UARTs), one of which supports
serial Infrared communication. Each UART includes a 16-byte send/receive FIFO, a programmable
baud rate generator, complete modem control capability, and a processor interrupts system. Both
UARTs provide legacy speed with baud rate up to 115.2k bps and also advanced speed with baud
rates of 230k, 460k, or 921k bps, which support higher speed modems. In addition, W83637HF/HG
provides IR functions: IrDA 1.0 (SIR for 1.152K bps) and TV remote IR (Consumer IR, supporting NEC,
RC-5, extended RC-5, and RECS-80 protocols).
W83637HF/HG supports one PC-compatible printer port (SPP), Bi-directional Printer port (BPP) and
also Enhanced Parallel Port (EPP) and Extended Capabilities Port (ECP). Through the printer port
interface pins, also available are: Extension FDD Mode and Extension 2FDD Mode allowing one or two
external floppy disk drives to be connected.
The configuration registers support mode selection, function enable/disable, and power down function
selection. Furthermore, the configurable PnP features are compatible with the plug-and-play feature
demand of Windows 95/98TM, which makes system resource allocation more efficient than ever.
W83637HF/HG provides functions that comply with ACPI (Advanced Configuration and Power
Interface), which includes support of legacy and ACPI power management through PME# or PSOUT#
function pins. For OnNow keyboard Wake-Up, OnNow mouse Wake-Up, and OnNow CIR Wake-Up.
W83637HF/HG also has auto power management to reduce the power consumption.
The keyboard controller is based on 8042 compatible instruction set with a 2K Byte programmable
ROM and a 256-Byte RAM bank. Keyboard BIOS firmware are available with optional AMIKEYTM -2,
Phoenix MultiKey/42TM, or customer code.
Publication Release Date: March, 2006
- 1 - Revision 1.6

6 Page









W83637HG pdf, datenblatt
W83637HF/HG
3. BLOCK DIAGRAM
LRESET#, LCLK, LFRAME#, LAD[3:0], LDRQ#, SERIRQ
Joystick interface
signals
MSI
MSO
General-purpose
I/O pins
Keyboard/Mouse
data and clock
Hardware monitor
channel and Vref
Memory Stick
Card interface
signals
LPC
Interface
Game
Port
MIDI
GPIO
KBC
HM
MS
ACPI
FDC
URA, B
IR
CIR
PRT
SC
SD
Floppy drive
interface signals
Serial port A, B
interface signals
IRRX
IRTX
CIRRX#
Printer port
interface signals
Smart Card
interface signals
Secure Digital
Memory Card
interface signals
Publication Release Date: March, 2006
- 7 - Revision 1.6

12 Page





SeitenGesamt 30 Seiten
PDF Download[ W83637HG Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
W83637HFLPC I/OWinbond
Winbond
W83637HGLPC I/OWinbond
Winbond

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche