Datenblatt-pdf.com


UFX6000 Schematic ( PDF Datasheet ) - SMSC

Teilenummer UFX6000
Beschreibung USB 2.0 Hi-Speed Graphics Controller
Hersteller SMSC
Logo SMSC Logo 




Gesamt 30 Seiten
UFX6000 Datasheet, Funktion
UFX6000
USB 2.0 Hi-Speed Graphics
Controller with VGA, HDMI/DVI,
and Digital RGB Interfaces
PRODUCT FEATURES
Highlights
Single-Chip Hi-Speed USB 2.0 Graphics Adapter
USB 2.0 Device Controller with Integrated USB 2.0
PHY
Highly Efficient Compression Algorithm
HDMI/DVI Display Connectivity via Integrated
HDMI/DVI Controller/PHY
VGA Display Connectivity via Integrated Video DAC
Support for External Display Interface IC’s via
Digital RGB Interface
High Performance DDR2 SDRAM Controller with
Integrated DDR2 PHY
Target Applications
USB to Video Adapters
Docking Stations, USB Port Replicators
Thin Clients
USB Monitors and Projectors
Embedded Systems
Features
USB 2.0 Device Controller
— Fully compliant with Universal Serial Bus Specification
Revision 2.0
— Operates in HS (480 Mbps) mode
— Supports Control, Bulk-Out, and Interrupt-In endpoints
— Supports vendor specific commands
— Integrated USB 2.0 PHY
— Integrated USB termination pull-up/pull-down resistors
— Short circuit protection of USB differential signals
Datasheet
Graphics Subsystem
— Integrated HDMI/DVI Controller and PHY
– Complies with DVI specification v1.0
– Complies with HDMI specification v1.3
– S/PDIF and I2S inputs for HDMI audio
(2-channel uncompressed PCM)
– Master I2C interface for DDC connection
— Integrated Triple 10-bit Video DAC with VGA output
— Digital RGB Interface
– 12/15-bit double data rate digital RGB
– 24-bit single data rate digital RGB
— Supports up to 2048x1152 (QWXGA) with 32-bit color
— 8-bit and 16-bit color support
— Supports display cloning and extending
— Standard and wide screen aspect ratios
— Complies with VESA auto display identification
— Gamma correction
— Color Look-Up Table (CLUT)
— Triple-buffered animations
— Graphics Engine
– Optimized algorithms for static and dynamic content
– I2C controller
DDR2 SDRAM Controller
— 16-bit data bus, 13-bit address bus
— JEDEC DDR2 compliant (JESD79-2E)
— Integrated DDR2 SDRAM PHY
Power
— Reduced power operating modes
— Supports bus-powered and self-powered operation
Miscellaneous Features
— Optional EEPROM controller
— IEEE 1149.1 (JTAG) boundary scan TAP controller
Software
— Microsoft Windows® XP/Vista/7 drivers
Packaging & Environmental
— 225-ball LFBGA, RoHS compliant package
— Commercial temperature range (0°C to +70°C)
SMSC UFX6000
DATASHEET
Revision 1.4 (06-24-13)






UFX6000 Datasheet, Funktion
USB 2.0 Hi-Speed Graphics Controller with VGA, HDMI/DVI, and Digital RGB Interfaces
Datasheet
Chapter 1 Introduction
The UFX6000 is a high performance USB 2.0 graphics adapter with multiple graphics interfaces. The
UFX6000 is an ideal solution for extending a PC workspace to an additional monitor without the need
for an additional internal graphics card. With applications ranging from docking stations, USB port
replicators, USB monitors/projectors, and embedded systems, the UFX6000 is targeted as a high
performance, low cost USB-to-graphics solution.
The UFX6000 contains an integrated USB 2.0 Device Controller, USB 2.0 PHY, USB Bulk-Out
Controller, Control Endpoint, Interrupt-In Endpoint, DDR2 SDRAM Controller/PHY, Graphics Engine,
HDMI/DVI Controller/PHY, Video DAC, TAP Controller, EEPROM Controller, and I2C Controller.
Figure 1.1 details an internal block diagram of the UFX6000.
EEPROM
EEPROM
Controller
JTAG TAP
Controller
USB 2.0
Device
Ctrl
(UDC 2.0)
USB USB 2.0
PHY
UFX6000
PLLs
DDR2 SDRAM
DDR2 PHY
DDR2 Controller (DCTL)
FIFO Ctl
(FCT)
USB Bulk Ctl
(URX)
Graphics
Engine
(GPH)
Display
Controller
(DISP)
Digital RGB
Control
Endpoint
SCSRs
Interrupt
Endpoint
I2C
Controller
Video
DAC
I2C
Figure 1.1 Internal Block Diagram
HDMI/DVI
Controller
HDMI PHY
S/PDIF
I2S
HDMI/DVI
VGA
1.1 USB Device Controller
The USB Device Controller is fully compliant with the USB 2.0 Specification, enabling the device to
operate in Hi-Speed (480 Mbps) mode. An integrated USB 2.0 PHY is provided on the USB port.
The controller implements three USB endpoints: Control, Bulk-Out, and Interrupt-In. The Bulk-Out
endpoint allows for uncompressed or compressed graphics data reception from the USB port. The USB
Bulk-Out Controller collects the graphics information and transfers it to the Graphics Engine.
Implementation of vendor-specific commands allows for access to the device System Control and
Status Registers (SCSRs).
Revision 1.4 (06-24-13)
6
DATASHEET
SMSC UFX6000

6 Page









UFX6000 pdf, datenblatt
USB 2.0 Hi-Speed Graphics Controller with VGA, HDMI/DVI, and Digital RGB Interfaces
Datasheet
NUM PINS
NAME
Green Pixel
Data Channel
Bit 6
DDR RGB
1 Data 7
General
Purpose I/O
14
Green Pixel
Data Channel
Bit 5
DDR RGB
1 Data 8
General
Purpose I/O
13
Green Pixel
Data Channel
Bit 4
DDR RGB
1 Data 9
General
Purpose I/O
12
Green Pixel
Data Channel
Bit 3
1 General
Purpose I/O
11
Green Pixel
Data Channel
Bit 2
1 General
Purpose I/O
10
Table 2.2 Digital RGB Pins (continued)
SYMBOL
VDATAG6
BUFFER
TYPE
DESCRIPTION
RGB
Green Pixel Video Data Bit 6, RGB Single Ended
Mode.
VD7 RGB Used in RGB DDR Mode, refer to Table 2.3.
GPIO14
VDATAG5
IS/O8/
OD8
(PU)
Note 2.1
RGB
This General Purpose I/O pin is fully
programmable as either a push-pull output, an
open-drain output, or a Schmitt-triggered input.
Green Pixel Video Data Bit 5, RGB Single Ended
Mode.
VD8 RGB Used in RGB DDR Mode, refer to Table 2.3.
GPIO13
VDATAG4
IS/O8/
OD8
(PU)
Note 2.1
RGB
This General Purpose I/O pin is fully
programmable as either a push-pull output, an
open-drain output, or a Schmitt-triggered input.
Green Pixel Video Data Bit 4, RGB Single Ended
Mode.
VD9 RGB Used in RGB DDR Mode, refer to Table 2.3.
GPIO12
VDATAG3
IS/O8/
OD8
(PU)
Note 2.1
RGB
This General Purpose I/O pin is fully
programmable as either a push-pull output, an
open-drain output, or a Schmitt-triggered input.
Green Pixel Video Data Bit 3, RGB Single Ended
Mode.
GPIO11
VDATAG2
IS/O8/
OD8
(PU)
Note 2.1
RGB
This General Purpose I/O pin is fully
programmable as either a push-pull output, an
open-drain output, or a Schmitt-triggered input.
Green Pixel Video Data Bit 2, RGB Single Ended
Mode.
GPIO10
IS/O8/
OD8
(PU)
Note 2.1
This General Purpose I/O pin is fully
programmable as either a push-pull output, an
open-drain output, or a Schmitt-triggered input.
Revision 1.4 (06-24-13)
12
DATASHEET
SMSC UFX6000

12 Page





SeitenGesamt 30 Seiten
PDF Download[ UFX6000 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
UFX6000USB 2.0 Hi-Speed Graphics ControllerSMSC
SMSC

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche