Datenblatt-pdf.com


PUD-2415C.3 Schematic ( PDF Datasheet ) - DANUBE

Teilenummer PUD-2415C.3
Beschreibung DC-DC Converter
Hersteller DANUBE
Logo DANUBE Logo 




Gesamt 12 Seiten
PUD-2415C.3 Datasheet, Funktion
PU SERIES
1W UNREGULATED
FEATURES
SINGLE IN LINE PACKAGE
1W UNREGULATED OUTPUT POWER
100% BURN IN
HIGH EFFICIENCY
INTERNAL SMD TECHNOLOGY
NO HEATSINK REQUIRED
UL 94V-0 PACKAGE MATERIAL
CUSTOM SOLUTIONS AVAILABLE
RoHS COMPLIANT
3 YEARS WARRANTY
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
Voltage Set-point Accuracy
+/-2% max Input Voltage Range
+/-10% max
Temperature Coefficient
+/-0.05%/°C Input Filter
Capacitor Typ
Ripple & Noise(20MHz BW)
Line Regulation1
Load Regulation2
100mVp-p max Input Reflected Ripple Current
50mAp-p max
+/-1.2% max Protection
Fuse Recommended
+/-8% max GENERAL SPECIFICATIONS
Minimum Load
Short Circuit Protection
20% of Full Load Efficiency
Momentary Isolation Voltage3
70%-83%
Single/Dual
1500-3000 VDC min
Twin
In to Out
1000 VDC min
ENVIRONMENTAL SPECIFICATIONS
Isolation Resistance
Isolation Capacitance
Out to Out
500 VDC min
109 ohms min
80pF max
Operating Temperature
Storage Temperature
-40°C to +71°C Switching Frequency
-55°C to +125°C MTBF4
100KHz min
>2,000,000 Hours
Humidity
95% max Weight
2.1g Typ
Cooling
Free-Air Convection Case Material
Non-Conductive Plastic
Case Size
19.6mm*6.1mm*10.2mm
19.6mm*7.1mm*10.2mm
Conducted Emissions
EN55022 Class A
Radiated Emissions
EN55022 Class A
ALL SPECIFICATIONS TYPICAL AT NOMINAL LINE, FULL LOAD AND 25 OC UNLESS OTHERWISE NOTED.
1 Line Regulation is for a 1.0% change in input Voltage.
2 Load Regulation is for output load current change from 20% to 100%.
3 1500VDC for 10 seconds,3000VDC for 3 seconds.
4 MIL-HDBK-217F @25 °C , Ground Benign.
DANUBE
http://www.danube.com.tw
5-1
2011/05/03






PUD-2415C.3 Datasheet, Funktion
MECHANICAL DIMENSIONS &
RECOMMENDED FOOTPRINT DETAILS
19.6[0.77]
PACKAGE ”A”
PIN SINGLE
DUAL
FRONT
VIEW
10.14[0.40]
1 +Vin
2 -Vin
+Vin
-Vin
3.81[0.15]
4 -Vout -Vout
2.54[0.10]
5 NP COMMON
6 +Vout +Vout
6.1[0.24] BOTTOM VIEW
12 456
1.2[0.05]
NOTE : All Dimensions In mm(Inches)
1. Pin Size is 0.50x0.30mm[0.02x0.01”]
2. Pin is Tolerance .XX= ±0.05mm
3. Tolerance .X or .XX= ±0.5mm
All dimensions are in mm[inches]
SINGLE
OUTPUT
TOP VIEW
2.54mm
DUAL
OUTPUT
TOP VIEW
2.54mm
12 4 6
12 4 56
19.6[0.77]
PACKAGE ”B”
PIN SINGLE
DUAL
FRONT
VIEW
10.14[0.40]
1 +Vin
2 -Vin
+Vin
-Vin
3.81[0.15]
5 -Vout -Vout
2.54[0.10]
6 NP COMMON
7 +Vout +Vout
6.1[0.24] BOTTOM VIEW
1 2 5 67
1.2[0.05]
NOTE : All Dimensions In mm(Inches)
1. Pin Size is 0.50x0.30mm[0.02x0.01”]
2. Pin is Tolerance .XX= ±0.05mm
3. Tolerance .X or .XX= ±0.5mm
All dimensions are in mm[inches]
SINGLE
OUTPUT
TOP VIEW
2.54mm
DUAL
OUTPUT
TOP VIEW
2.54mm
12 5 7
12 567
DANUBE
http://www.danube.com.tw
5-6
2011/05/03

6 Page









PUD-2415C.3 pdf, datenblatt
DERATING CURVE
125%
100%
75% SA FE
50% O P ER ATIN G
AREA
25%
-40 -20
0 20 40 60
TA(degree C )
80 100
EFFICIENCY VS LOAD
80.0
60.0
40.0
20.0
0.0
0
20 40 60 80 100
% OF RATED LOAD(%)
INPUT FUSE SELECTION GUIDE
4.5-5.5V
INPUT VOLTAGE(VDC)
10.8-13.2V
INPUT VOLTAGE(VDC)
800mA Slow-Blow Type
INPUT
300mA Slow-Blow Type
Fuse
+Vin
+Vout
21.6-26.4V
INPUT VOLTAGE(VDC)
150mA Slow-Blow Type
OUTPUT
DC-DC
CONVERTER
-Vin -Vout
Note: Certain applications may require the installation of external fuse in front of the input.
PU SERIES APPLICATION NOTES:
EXTERNAL CAPACITANCE REQUIREMENTS:
Output filtering is required for operation. A minimum of 10uF is needed. Output capacitance may be
increased for additional filtering, not to exceed 220uF.
To meet the reflected ripple requirements of the converter, an input impedance of less than 0.5ohm
from DC to 250KHz is required.
We Can Offer EMC-Filter According To EN55011/22 Class B.
Negative Outputs:
A negative output voltage may be obtained by connecting the +OUT to circuit ground and
connecting –OUT as the negative output.
FOR MORE INFORMATION CALL:
Danube Enterprise Co., Ltd.
Tel: 886-7-3755165
Fax: 886-7-3755330
Home Page
http://www.danube.com.tw
DANUBE
http://www.danube.com.tw
5-12
2011/05/03

12 Page





SeitenGesamt 12 Seiten
PDF Download[ PUD-2415C.3 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
PUD-2415C.3DC-DC ConverterDANUBE
DANUBE

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche