Datenblatt-pdf.com


SM10 Schematic ( PDF Datasheet ) - MIC

Teilenummer SM10
Beschreibung TVS Diode, SMD (Transient Voltage Suppressor)
Hersteller MIC
Logo MIC Logo 




Gesamt 4 Seiten
SM10 Datasheet, Funktion
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
SM6.8 THRU SM200CA
Breakdown Voltage
Peak Pulse Power
6.8 to 200 Volts
400 Watts
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
For surface mounted applications
Glass passivated junction
Low inductance surge resistance
Fast response time: typical less than 1.0ps
from 0 volts to V(BR) for unidirectional AND 5.0ns for
bidirectional types
400W peak pulse capability with a 10/1000μs waveform,
repetition rate (duty cycle): 0.01%
For devices with V(BR) 10V, ID are typically less than 1.0μA
High temperature soldering guaranteed:
250/10 seconds at terminals
DO-213AB
Dimensions in inches and (millimeters)
MECHANICAL DATA
Cass: JEDEC DO-213AB,molded plastic body over passivated junction
Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
Polarity: Blue bands denotes positive end (cathode) for unidirectional and yellow band in the
Middle for bidirectional types
Mounting position: any
Weight: 0.116 ounces, 0.0064 gram
DEVICES FOR BIDRECTIONAL APPLICATIONS
For bidirectional applications use suffix letters C or CA for types SM6.8 thru SM200A (e.g. SM6.8C,
SM200CA).Electrical Characteristics apply in both directions.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25ambient temperature unless otherwise specified
Ratings
Symbols
Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1,FIG.1)
Steady Stage Power Dissipation at TT=75(Note2)
Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3)
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load for unidirectional only
(JEDEC Method) (Note3)
Maximum instantaneous forward voltage at 25A (NOTE 3)
for unidirectional only
Operating Junction and Storage Temperature Range
PPPM
PM(AV)
IPPM
IFSM
VF
TJ, TSTG
Value
Minimum 400
1.0
See Table 1
40.0
3.5
50 to +150
Unit
Watts
Watt
Amps
Amps
Volts
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25per Fig.2
2. Mounted on copper pads to each terminal of 0.31 in (8.0mm2) per Fig 5.
3. Measured at 8.3ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minutes maximum.
E-mail: [email protected] Web Site: www.cnmic.com





SeitenGesamt 4 Seiten
PDF Download[ SM10 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
SM10TVS Diode, SMD (Transient Voltage Suppressor)MIC
MIC
SM100Rectifier DiodeSemtech
Semtech
SM100TVS Diode, SMD (Transient Voltage Suppressor)MIC
MIC
SM10043ElectromagnetsSolentec
Solentec
SM100ATVS Diode, SMD (Transient Voltage Suppressor)MIC
MIC

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche